How to use align command better in CAD?

Function 1: Move #

The full name of the al command is align. On the command line, enter al, select the object, and then prompt to specify the first source point and the first target point. After specifying the first point, right-click to end the command. When selecting an object, it will move to the target point.

Function 2: Scale #

At the command line, enter al, select the object, and then prompt to specify the first source point and first target point, followed by a prompt to specify the second source point and second target point. Then click the right mouse button and the command line will prompt whether to zoom. Enter y to scale the object.

Function 3: Align #

There are two operations for align

First operation

All you need is line alignment, so only two points are needed. At this point, a step different from Function 2 is to enter n when prompted on the command line whether to zoom.

Second operation

On the command line, enter al, select the object, and then prompt to specify the first source point and the first target point. Prompts to specify a second source point and a second target point. Immediately prompt to specify a third source point and a third target point. After clicking on the third target point, the alignment operation will be completed directly.

Scroll to Top