Fillet and Chamfer

Table of Contents

Fillet #

A fillet connects two objects with a tangent arc 

• Click Menu “Editor/Fillet”
• Choose the fillet radius
• Select two lines to fillet.

Chamfer #

A chamfer connects two objects with an angled line in 2D.

• Click Menu “Editor”, and then choose “Chamfer”
• Choose the chamfer value
• Select the two lines to chamfer

Chamfer2 #

Quick chamfer as distance-distance to trim

Shaft Chamfer #

If you are drawing shaft, this tool can help you chamfer the symmetrical corners directly.

Shaft chamfer setting
  • Command line enter “shaftchamfer”
  • Enter the shaft chamfer value
  • Select shaft chamfering end face
  • Select an outline of the turning face
  • Select another outline of the turning face
Select1, and then select2/3

Hole Chamfer #

Hole chamfer setting
  • Command line enter “holechamfer”
  • Select hole chamfering end face
  • Select an outline of the turning face
  • Select another outline of the turning face
  • Enter the shaft chamfer value
Select 1, and then select 2/3

Shaft undercut #

Shaft undercut setting
  • Command line enter “shaftundercut”
  • Enter the shaft undercut value
  • Select shaft undercut end face
  • Select an outline of the turning face
  • Select another outline of the turning face
Select1, and then select 2,3

Hole undercut #

Hole undercut setting
  • Command line enter “holeundercut”
  • Select hole undercut end face
  • Select an outline of the turning face
  • Select another outline of the turning face
  • Enter the hole undercut value
Select 1 and then select 2/3
Modify