CAD Exercise 5 (ID:7683)

To create a stylish logo pattern, utilize the CAD command ‘arc’ with the ‘start_end_angle’ option. Use the ‘Ctrl’ button to toggle the arc direction. Enhance the visual appeal by adjusting the line width.

Steps：

  1. Draw a hexagon with a diagonal distance of 100 units.
  2. Utilize the ‘arcppa’ command to draw an arc on each edge of the hexagon, specifying the arc parameters with ‘arc-start_end_angle’. Press the ‘Ctrl’ button to switch the arc direction.
  3. Add annotations as needed.
  4. You may need to adjust the line width from the layer pull-down menu. And, be sure you’ve enable “show/hide line width” in the options menu to make it visible.
Exercise, For Beginner